MENU

Risk! A 2-meter-long steel bar fell from the elevator shaft to penetrate the worker's helmet and insert it into the head.

2024-05-14

author:

Page view:


Risk! A 2-meter-long steel bar fell from the elevator shaft to penetrate the worker's helmet and insert it into the head.

At about 17: 30 on September 29, at the construction site of the new era in shiban street, Suixi county, Huaibei city,One worker's safety helmet was penetrated by a 2-meter-long steel bar that suddenly fell, inserted into the head.
On the evening of September 29, the reporter interviewed Huaibei Fire Department and learned,At the time of the incident, the worker was in an elevator shaft on the third floor of a construction site. "at that time, he and his workmates were working together, and a steel bar fell from above without warning, just passing directly through the left rear of his head." Firefighters recalled that when they received the alarm, they rushed to the scene for disposal as soon as possible.
 
After arriving at the scene, the medical staff had begun to give the injured infusion. Fortunately, the party had a clear consciousness and was sitting on the platform of the elevator shaft.A steel bar more than 2 meters long penetrated behind the safety helmet on his head and penetrated his head. The scene was very scary. With the assistance of medical staff, fire rescue personnel immediately launched rescue.
 
The reporter saw from the scene rescue video that the fire rescue personnel first entered the elevator shaft. Under the guidance of the doctor, the fire rescue personnel used insulating shears to cut the steel bar to the length specified by the medical staff. After fixing the steel bar, the steel bar was cut off quickly, leaving only about 20cm long.
As a result, rescuers and medical staff at the scene carefully helped the injured and carried them to the stretcher and sent them to the hospital for treatment. After arriving at the hospital, the treatment encountered new challenges. "At that time, because there was no demolition tool in the hospital, the workers could not be treated for the next step." Rescuers said that after more than ten minutes of rescue, they used scissors and other small demolition tools to cut off the soft group structure inside the helmet, and successfully removed the helmet before emergency treatment.
 

At present, the injured workers are in the hospital for further treatment, but fortunately there is no life safety.

Article Source: Network

If there is infringement, contact Li delete


Keywords:

AVIC Elevator Equipment, AVIC Elevator, Elevator Sales, AVIC Elevator Sales, Elevator Maintenance