Implementation of the National Standardization Development Program Action Plan (2024-2025)

In order to solidly promote the in-depth implementation of the National Standardization Development Program (hereinafter referred to as the outline), anchor the 2025 development goals, clarify the key tasks in the next two years, orderly promote the in-depth development of global standardization, focus on improving the level of standardization development, and steadily expand the standard system Opening up, continuously consolidating the foundation for standardization development, so that standardization can play a greater role in accelerating the construction of a new development pattern and promoting high-quality economic and social development, formulate this action plan.

1. strengthen the interaction between standardization and scientific and technological innovation

(I) Strengthen Key Technical Field Standards. Focus on key areas such as integrated circuits, semiconductor materials, biotechnology, germplasm resources, special rubber, and artificial intelligence, intelligent networked vehicles, and Beidou scale applications, and accelerate the development of a number of important technical standards. Strengthen the basic software, industrial software, application software standard system construction, as soon as possible the introduction of the industry urgently needed standards. Establish and improve standards for cross-border data transmission and security. We will implement the construction of information standards, aim at upgrading new scenarios such as the evolution route of next-generation Internet technology, strengthen the construction of blockchain and distributed accounting technology standard systems, and carry out research on core standards such as 6G, IPv6, blockchain and distributed digital identity distribution. The National Development and Reform Commission, the Ministry of Industry and Information Technology, the Ministry of Science and Technology, the National Health Commission, the Central Cyberspace Administration of China, the Ministry of Agriculture and Rural Affairs, the General Administration of Market Supervision (National Standards Commission), and the National Data Administration take the lead, and all relevant departments and local people's governments The relevant competent departments are responsible according to the division of responsibilities. The following shall be the responsibility of the relevant competent department of the local people's government and shall not be listed any more 〕

(II) Improve the Standard Transformation Mechanism of Scientific and Technological Achievements. Introduce guidance to promote the interactive development of standardization and scientific and technological innovation. We will improve the linkage mechanism between major scientific and technological projects and standardization work, set standard research tasks and assessment objectives in scientific and technological planning projects, and promote the synchronous deployment, synchronous progress and synchronous completion of project establishment and standard development. Improve the evaluation index system and service mechanism for the transformation of scientific and technological achievements into standards, and use standards to lead the transformation of scientific and technological achievements into productivity. Promote the inclusion of standards in the scope of science and technology awards. Improve the policy of coordination between standards and patents. Formulate and implement measures for the management of national standardization guidance technical documents, and accelerate the process of standardization of cutting-edge technological achievements. Strengthen the standard development into the national technology innovation center and other common technology platform construction, shorten the standard development cycle. Strengthen the next generation of the Internet, meta-universe, synthetic biology and other emerging areas of standardization pre-research, accelerate the construction of standardization project research group. Establish a green channel for the pre-evaluation of national standards for the output of common key technologies and applied science and technology plan projects, and promote the formation of standard research results to reach more than 50%. [The Ministry of Science and Technology, the General Administration of Market Supervision (National Standards Committee) take the lead, and the Central Cyberspace Administration, the State Intellectual Property Office, the Chinese Academy of Sciences, the Chinese Academy of Engineering, etc. are responsible according to the division of responsibilities] 〕

2. enhance the standardization level of modern industry

(III) and improve the industrial basic standard system. To formulate and revise common technical standards for core basic components (components) such as precision reducers, high-end bearings and automotive chips, and promote the solution of key issues such as high performance, high reliability and long life of products. Strengthen the development of additive manufacturing process standards such as powder bed melting, and improve the basic process standards for electronic processing such as component packaging and curing, new display film packaging. Promote the development of standards for high-end metal materials, new polymer materials and electronic special materials. Speed up the completion of research and development design, manufacturing and other industrial software standard short board. A number of industrial basic standards were revised to promote the advanced industrial base. [The Ministry of Industry and Information Technology and the General Administration of Market Supervision (National Standards Committee) take the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(IV) Strengthen Industrial Convergence Standard Formulation. Focusing on the deep integration of digital technology and the real economy, accelerate the development of standards related to the integration of emerging technologies such as the Internet of Things, big data, and cloud computing with traditional industries, improve the standard system, promote the upgrading of traditional manufacturing standards, and improve enterprise technological transformation standards. We will implement a strong foundation project for standardization of high-end equipment manufacturing, continuously improve the standard system for the integration of informatization and industrialization, and focus on key areas such as the stability of the industrial chain supply chain, the integration of large and medium-sized enterprises, and green carbon reduction. We will accelerate the formulation and revision of key standards for digital transformation, such as technology application, model innovation, classification, testing and evaluation, and interconnection, and promote the implementation of digital transformation standards by enterprises in an orderly manner. We will deepen the pilot application of standards such as intelligent manufacturing, and promote the intelligent transformation and upgrading of traditional industries such as mining, metallurgy, petrochemical, machinery and textile. Focusing on the integration of advanced manufacturing and modern service industries, we will improve the service-oriented manufacturing standard system, and strengthen the formulation of service-oriented manufacturing standards such as personalized customized shared manufacturing, full life cycle management, and total integrated general contracting. Focusing on the integration of finance and the real economy, we will focus on the development of standards for inclusive finance, cross-border financial services, digital finance, risk prevention and control, so as to prevent and resolve financial risks and effectively serve the development of the real economy. [The Central Cyberspace Administration of China, the Ministry of Industry and Information Technology, the People's Bank of China, the General Administration of Market Supervision (National Standards Committee), the General Administration of Financial Supervision, the China Securities Regulatory Commission, the National Data Administration, the National Mine Safety Supervision Bureau, etc. are responsible according to the division of responsibilities] 〕

(V) promotes the upgrading of product and service consumption standards. We will implement actions to strengthen the standardization of consumer goods, speed up the upgrading and iteration of standards for bulk consumer goods, establish and improve the quality grading standard system for consumer goods, promote the development of consumer experience standards for products and services, and take the improvement of technology, energy consumption, emission and other standards as the traction. we will promote large-scale equipment renewal and trade-in of consumer goods. Formulate smart home standards that support coordination and unification, and improve the standard system of smart home appliances and electric furniture. We will improve the standard system for consumer electronic products and promote the interconnection of multi-variety and multi-brand intelligent electronic products, mobile communication terminal products, wearable devices and other products. Continuously strengthen the revision of mandatory national standards and supporting recommended standards for textile and clothing, footwear, bags and home decoration products. Focus on improving the safety and quality standards of "suitable old and suitable for small" products, and increase the standard supply of emerging consumer products such as smart products and functional products. Improve standards for charging piles, electric vehicles, and power batteries, accelerate the implementation and application of high-power DC charging series standards, and study and formulate mandatory national standards for charging pile safety. Increase the revision of modern service industry standards, and accelerate the development of standards in the fields of modern logistics, cross-border e-commerce, sharing economy, and intermodal transport. Development of platform economy-based bulk materials and bulk commodity codes and other related standards for commerce, transportation, logistics, etc., to promote the transformation and upgrading of traditional service industries. Promote the revision of service standards in the field of culture and tourism, and promote service consumption. Improve sports standards, formulate and improve standards for mass fitness, ice and snow sports, sports events, sports venues, and sporting goods. The General Administration of Market Supervision (National Standards Commission) and the Ministry of Industry and Information Technology take the lead, and the National Development and Reform Commission, the Ministry of Housing and Urban-Rural Development, the Ministry of Transport, the Ministry of Commerce, the Ministry of Culture and Tourism, the General Administration of Sports, and the National Energy Administration are responsible according to the division of responsibilities 〕

(VI) speed up industrial innovation standards to lead. Implement the new industry standardization pilot project, focusing on the new generation of information technology, new energy, new materials, high-end equipment, new energy vehicles, green environmental protection, civil aviation, urban rail transit, ship and marine engineering equipment, safety emergency equipment and other industrial fields. Keep an eye on the development trend of the industry, develop relevant standards appropriately in advance, and lead the innovation and development of the industry with standards. Focus on brain-computer interface, quantum information, generative artificial intelligence, meta-universe and other fields, forward-looking layout of future industry standard research. Continue to carry out national high-tech industry standardization pilot demonstration, strengthen industrial innovation and development standardization demonstration lead. The Ministry of Industry and Information Technology, the Ministry of Science and Technology, and the General Administration of Market Supervision (National Standards Commission) take the lead, and the Central Cyberspace Administration, the Ministry of Transport, the National Health Commission, the National Energy Administration, the National Data Administration, and the Civil Aviation Administration of China are responsible according to the division of responsibilities.] 〕

(VII) Perfecting the Supporting Standard Chain of Industrial Chain. The implementation of standardization to help key industries to stabilize the chain project, improve the industrial mother machine, new display and other important industrial chain standard system, the establishment of industrial mother machine and other key industrial chain standardization joint working group, synchronous promotion of technical research and standard development. Give full play to the role of leading enterprises, unite the upstream and downstream industry chain industry-university-research-related aspects and specialized new small and medium-sized enterprises, focus on the urgent need of the industrial chain supply chain, speed up the development of supporting standards. Strengthen the linkage of standardization technical organizations upstream and downstream of the industrial chain, promote the effective convergence of standard systems in various fields in the upstream and downstream links, and enhance the resilience and safety level of the industrial chain supply chain. Build 50 national high-end equipment manufacturing standardization pilot, leading the manufacturing industry to optimize and upgrade the key industrial chain. [The Ministry of Industry and Information Technology and the General Administration of Market Supervision (National Standards Committee) take the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(VIII) to strengthen the construction of new infrastructure standards. We will implement special actions for the standardization of new infrastructure, continue to promote the development of basic and applied standards in key areas of information infrastructure, such as mobile communication networks, fixed broadband networks, spatial information, and new data centers, and speed up the improvement of the standard system. to provide technical support for the construction, operation and safety of new infrastructure. Give full play to the advantages of rapid iteration of the new generation of information technology, focus on the industrial Internet, vehicle networking, land and space planning implementation monitoring network and other key areas of integrated infrastructure, accelerate the development of standards, release the effectiveness of new infrastructure. The Ministry of Industry and Information Technology, the Central Cyberspace Administration of China, the National Development and Reform Commission, and the General Administration of Market Supervision (National Standards Commission) take the lead, and the Ministry of Natural Resources, the Ministry of Housing and Urban-Rural Development, the Ministry of Transport, the National Energy Administration, and the National Data Administration are responsible for the division of responsibilities 〕

3. Improve the Standardization Guarantee of Green Development

(IX) continues to improve the carbon peak carbon neutral standard system. Accelerate the improvement of carbon emission accounting and reporting standards for enterprises in key industries, accelerate the development of basic general national standards for product carbon footprint accounting, formulate and revise carbon emission verification procedures, personnel and institutional standards, and promote the development of basic common standards such as carbon emission intensity and carbon footprint for key products such as steel, aluminum, plastics and power batteries. Encourage enterprises to actively participate in the development of international standards related to carbon footprint accounting. Steadily improve the energy consumption and energy efficiency standard indicators of energy-using products in key industries, accelerate the revision of energy-saving standards in emerging fields, and focus on improving supporting standards such as energy consumption calculation, energy efficiency testing, and energy-saving evaluation. Strengthen the use of clean energy, accelerate the supply of hydrogen energy industry chain standards, and improve the new energy storage standard system. Advance layout carbon capture utilization and storage standards research and development, promote key technical standards and scientific and technological research and development, demonstration and promotion of collaborative promotion. Formulate standards for monitoring and accounting of carbon sinks in terrestrial and marine ecosystems and provincial greenhouse gas inventories, improve the standard system for carbon sequestration in agricultural and rural areas, and formulate standards for soil and water conservation carbon sinks. National Development and Reform Commission, Ministry of Science and Technology, Ministry of Industry and Information Technology, Ministry of Natural Resources, Ministry of Ecological Environment, Ministry of Transport, Ministry of Water Resources, Ministry of Agriculture and Rural Affairs, General Administration of Market Supervision (National Standards Commission), National Energy Administration, National Forestry and Grass Bureau, etc. according to the division of responsibilities 〕

Strengthening the Development of Ecological Environment Protection and Restoration Standards in (X). Accelerate the development and revision of standards and norms in key areas of beautiful China construction. We will further improve the pollution prevention and control standards for air, water, soil, noise, ocean, chemicals and new pollutants, formulate environmental quality standards for drinking water sources, improve the technical standard system for the supervision and management of sewage outlets into rivers and seas, and develop 20 noise-related standards for household appliances, vehicles, ships, general machinery and other products. We will improve the standard system for biodiversity investigation, assessment and monitoring, speed up the formulation of standards for the prevention, control and management of invasive alien species, and carry out the development of standards for monitoring, protection and restoration of agricultural ecological environment. We will further improve the standard system for groundwater protection, utilization and treatment. To carry out the national ecological situation survey and assessment and other technical specifications. We will promote the standardization of multi-ecosystem quality monitoring and evaluation of mountains, rivers, forests, lakes, grass and sand ice, develop relevant guidelines for integrated protection, restoration and effectiveness evaluation, and speed up the revision of relevant standards for ecological restoration such as mangroves and coastal wetlands. Establish and improve the ecological environment zoning control technical standard system, improve the environmental impact assessment standard system. Strengthen the formulation and application of ecological environmental supervision standards for ecological protection red lines, and promote the formulation and revision of national standards for the nature reserve system with national parks as the main body. Study and formulate ecological environment planning and management standards. Improve the standard system for the identification and assessment of ecological environmental damage. Strengthen the development and application of relevant standards for climate change monitoring, prediction, climate risk assessment, and climate change adaptation. Strengthening the formulation and revision of national standards for electromagnetic environmental protection in key areas such as radio observatories, meteorological radar stations, satellite measurement and control (navigation stations), and airports. [The Ministry of Industry and Information Technology, the Ministry of Natural Resources, the Ministry of Ecological Environment, the Ministry of Transport, the Ministry of Water Resources, the Ministry of Agriculture and Rural Affairs, the General Administration of Market Supervision (National Standards Committee), the China Meteorological Administration, the National Forestry and Grass Administration, etc. are responsible according to the division of responsibilities] 〕

(11) Promoting the construction of standards for the economical and intensive use of natural resources. Accelerate the development of basic general standards for land and space planning, study and formulate relevant evaluation standards for land and space planning, and gradually build relevant standards covering the entire process of planning and management. Improve and improve the standard system for the evaluation of natural resources, grading and grading, and carry out the development of standards for the investigation, evaluation and monitoring of the quality of cultivated land (soil) resources, and quality sampling. Improve the basic geological survey and strategic mineral resources survey standards. We will carry out the revision of marine geological survey and evaluation and marine fishery resources survey standards, improve the monitoring standards of marine resources and assets such as the use of sea areas and the development and utilization of islands, and focus on promoting the development of standards such as seawater desalination and comprehensive utilization, the utilization of marine renewable energy, and marine biological resources. Improve the standards for the development and utilization of unconventional water sources such as rainwater collection, pit (well) water and brackish water. National Development and Reform Commission, Ministry of Natural Resources, Ministry of Housing and Urban-Rural Development, Ministry of Water Resources, Ministry of Agriculture and Rural Affairs, General Administration of Market Supervision (National Standards Commission), National Energy Administration, etc. shall be responsible according to the division of responsibilities 〕

(12) Promote the green and low-carbon transformation of production methods. Establish and improve agricultural green development standards, strengthen the formulation and revision of green inputs and agricultural water-saving standards, and continuously strengthen the development of agricultural waste recycling standards such as straw, livestock and poultry manure, and pesticide packaging waste. Formulate and revise the water quota standard for high-water-consuming industries. Strengthen the development of standards for industrial enterprises to reduce pollution and carbon, save energy, water and materials, comprehensive utilization of resources, green factories, green industrial parks, green supply chains, green product design, etc., explore and study the green and low-carbon transformation standards of digital enabling industries, and develop comprehensive utilization standards for industrial wastes such as tailings, coal gangue, smelting slag, phosphogypsum, etc. We will implement the general principles for the preparation of cleaner production evaluation index system, improve the cleaner production standard system, and carry out 60 pilot demonstration construction of circular economy standardization. Revised standards for the resource utilization of construction waste. Accelerate the improvement of green procurement, green circulation, green assessment and other green supply chain evaluation standards. Improve green financial standards and lead the green transformation and upgrading of the industry. National Development and Reform Commission, Ministry of Industry and Information Technology, Ministry of Ecology and Environment, Ministry of Housing and Urban-Rural Development, Ministry of Transport, Ministry of Water Resources, Ministry of Agriculture and Rural Affairs, Ministry of Commerce, People's Bank of China, General Administration of Market Supervision (National Standards Commission), Financial Supervision The General Administration, China Securities Regulatory Commission, etc. are responsible according to the division of responsibilities 〕

(13) strengthen the lifestyle of green low-carbon lead. Continue to expand the coverage of green product evaluation standards and revise the general rules for green product evaluation. Improve food and cosmetics, express logistics and other restrictions on excessive packaging standards. In-depth implementation of food and beverage waste and other national standards. Formulate and revise standards related to the classification and treatment of domestic waste. Study and formulate water quota standards for high water-consuming service industries. Establish evaluation standards for schools and green venues, promote the application of green hospital building evaluation standards, and promote the green transformation of public institutions. National Development and Reform Commission, Ministry of Education, Ministry of Industry and Information Technology, Ministry of Housing and Urban-Rural Development, Ministry of Transport, Ministry of Water Resources, Ministry of Commerce, National Health Commission, General Administration of Market Supervision (National Standards Commission), State Administration of Management, etc. according to the division of responsibilities 〕

4. Promote the Standardization Development of Urban and Rural Construction and Social Construction

(XIV) Implementation of Rural Revitalization Standardization Action. We will consolidate the standard foundation for ensuring food safety, establish and improve standards for the revitalization of the seed industry, the construction of high-standard farmland, the construction and protection of cultivated land quality, the monitoring and control of crop diseases and insect pests, the management and protection of farmland water conservancy, the quality of agricultural materials and infrastructure. We will optimize the quality and safety standards of agricultural products, strengthen the formulation and revision of intelligent agriculture, facility agriculture, the whole process quality control of agricultural products, and the grading standards for the quality of agricultural products. We will improve the standard system of the whole industrial chain of modern agriculture, and formulate standards for brand evaluation of agricultural products, agricultural socialization services for major grain and oil crops, impairment and efficiency of agricultural products and rural tourism. 700 standards in the field of agriculture were revised, and a standard system for high-quality agricultural development was basically established. Strengthen the construction of digital villages, rural houses and infrastructure, the construction and management of rural water supply projects, and the formulation of standards for village-level comprehensive service facilities and barrier-free facilities. Speed up the construction of rural living environment improvement standards such as rural toilet improvement, domestic sewage, garbage treatment, village greening and cleaning lighting. We have established 100 national agricultural standardization demonstration zones and 300 national modern agricultural whole industry chain standardization demonstration bases. [The Ministry of Agriculture and Rural Affairs, the General Administration of Market Supervision (National Standards Committee), and the Ministry of Housing and Urban-Rural Development take the lead, the Central Cyberspace Administration, the Ministry of Natural Resources, the Ministry of Ecological Environment, the Ministry of Water Resources, the Ministry of Culture and Tourism, the National Health Commission, the National Grain and Reserve Bureau, the National Forestry and Grass Bureau, etc. are responsible according to the division of responsibilities] 〕

(15) Promote the development of new urbanization standardization. We will carry out urban standardization actions, study and formulate urban physical examination and evaluation standards, improve relevant standards for urban renewal, and promote standardization construction in the fields of urban design, urban ecological restoration, urban historical and cultural protection, inheritance and style shaping, and transformation of old residential areas. Promote the establishment of a standard system for urban operation management service platforms, and strengthen the formulation and implementation of standards in areas such as urban infrastructure operation and monitoring, urban comprehensive management and supervision, and urban public service system construction and evaluation. Strengthen the construction of urban traffic standard system and improve the level of coordination and connection between planning, construction and operation. Improve standards in the field of urban human settlements such as sponge cities, livable cities and park cities. We will continue to deepen the creation of innovative cities with international standards, and carry out comprehensive pilot projects for standardization and innovation in 30 cities. [The Ministry of Housing and Urban-Rural Development, the General Administration of Market Supervision (National Standards Committee) takes the lead, and the Ministry of Natural Resources, the Ministry of Ecological Environment, the Ministry of Transport, the National Data Bureau, etc. are responsible according to the division of responsibilities] 〕

(16) Improve the efficiency of administrative standardization. We will improve the framework of the standard system for administrative management and government services, improve standards in areas such as administrative licensing, government service centers, national integrated government service platforms, handling of government service matters, and operation of convenient hotlines, and strengthen the implementation and application of standards in areas such as administrative examination and approval, online and offline integration of government services, and government affairs management. Study and formulate evaluation criteria for government mobile Internet applications. [The Central Cyberspace Administration of China, the State Administration of Market Supervision (National Standards Committee), and the State Administration of Management are responsible for the division of responsibilities] Accelerate the promotion of standardization in the fields of public resource transactions, fair competition, law enforcement supervision, and intellectual property rights, and promote the credit supervision standard system for business entities Build, improve the national unified credit supervision rules and standards, and maintain the market order of fair competition. Continue to promote the standardization and standardization of grass-roots market supervision. [The National Development and Reform Commission, the Ministry of Justice, the General Administration of Market Regulation (National Standards Commission), the State Intellectual Property Office, etc. shall be responsible according to the division of responsibilities] 〕

(xvii) Strengthening the standardization of social governance. Implement standardized social governance actions, and formulate and implement relevant standards in the fields of social security prevention and control, rural governance, and cyberspace governance. We will build more than 100 pilot projects for the comprehensive standardization of social management and public services, and promote the implementation and application of social governance standards. Strengthen forward-looking research and overall coordination on standardization in the field of institutional governance, and promote the simultaneous development and transformation of domestic and international standards in the fields of organizational governance and compliance management. Carry out the development of standards such as network security emergency capability assessment, data security risk assessment, data transaction service security, key information infrastructure security assessment, personal information security compliance audit, artificial intelligence security governance, network authentication infrastructure, etc., promote the construction of national standard verification points in the field of key information infrastructure, and improve the efficiency of network and data security governance. The Central Cyberspace Administration of China, the National Development and Reform Commission, the Ministry of Industry and Information Technology, the Ministry of Public Security, the General Administration of Market Supervision (National Standards Commission), and the National Data Bureau are responsible according to the division of responsibilities 〕

(XVIII) Implementation of standardized bottoming works for public safety. Accelerate the formulation and revision of mandatory standards in safety fields such as urban gas, hazardous chemicals, fireworks, oil and gas extraction, dust explosion prevention, hazardous operations, special equipment, personal protective equipment, and accident investigation statistics, and establish a rapid transformation of public safety standards in emergency situations And release mechanism. The General Administration of Market Supervision (National Standards Committee) and the Ministry of Emergency Management take the lead, and all relevant departments and units are responsible for the division of responsibilities. Strengthen emergency plan management, risk monitoring and early warning, disaster emergency response, emergency shelters, fire fighting and emergency rescue combat training and equipment, Forest and grassland fire fighting equipment, disaster relief and emergency material support and other field standards development. The Ministry of Public Security, the Ministry of Transport, the Ministry of Water Resources, the Ministry of Emergency Management, the General Administration of Market Supervision (National Standards Committee), the China Meteorological Administration, the State Mine Safety Supervision Bureau, the State Fire and Rescue Bureau, and the China Seismological Bureau are responsible for the division of responsibilities. Improve the standard system of court science, road traffic management and law enforcement case management centers, and promote the construction of national standard verification points in the field of court science. The Ministry of Industry and Information Technology, the Ministry of Public Security, the Ministry of Justice, the General Administration of Market Supervision (National Standards Committee), etc. are responsible for the division of responsibilities. Accelerate the development of security video surveillance system requirements, video coding and decoding technology, video image analysis, border security interaction and other standards, Provide technical support for the construction of public security video surveillance. Promote the establishment of biosafety standards system. The Central Cyberspace Administration of China, the Ministry of Industry and Information Technology, the Ministry of Public Security, and the National Health Commission are responsible according to the division of responsibilities 〕

(19) Implementation of the basic public service standard system construction project. We will improve standards in the fields of basic education, employment and entrepreneurship, basic old-age services, public culture and sports, and services for the disabled. We will promote the sharing of pilot experience in the standardization of basic public services, and set up a number of demonstration benchmarks in key areas such as Beijing, Tianjin, Hebei, Yangtze River Delta, Guangdong, Hong Kong and Macao. The National Development and Reform Commission, the Ministry of Finance, and the General Administration of Market Supervision (National Standards Commission) take the lead, and the Ministry of Education, the Ministry of Civil Affairs, the Ministry of Human Resources and Social Security, the Ministry of Culture and Tourism, the General Administration of Sports, and the China Disabled Persons' Federation are responsible according to the division of responsibilities. Strengthen the development of basic standards such as medical device risk management and quality management, and improve the high-end medical device standard system, promote the development of medical device standards in emerging fields such as medical robots, new biomedical materials, and molecular diagnostic technology, and improve the standard system for the diagnosis and protection of high-risk infectious diseases. Promote the upgrading and transformation of the public health standard system, and accelerate the formulation and implementation of standards for public place sanitation and public environmental health investigation and monitoring. Further improve the standard system of traditional Chinese medicine, and promote the revision of standards for the diagnosis of traditional Chinese medicine and clinical efficacy evaluation. Promote the establishment of a medical security standard system. The Ministry of Industry and Information Technology, the National Health Commission, the General Administration of Market Supervision (National Standards Commission), the National Medical Insurance Administration, the National Administration of Traditional Chinese Medicine, the National Bureau of Disease Control and Prevention, and the National Food and Drug Administration shall be responsible according to the division of responsibilities 〕

(20) Special Action to Promote the Standardization of Elderly Care and Domestic Service. Upgrade the standard system for old-age and domestic service, carry out home-based old-age services, elderly meals, cognitive impairment care, infant care and other care services, domestic e-commerce standard revision. We will build 80 pilot demonstration projects for standardization in the field of old-age care and domestic service, and strengthen the implementation and application of standards for old-age care and domestic service. [The Ministry of Civil Affairs, the Ministry of Commerce, and the General Administration of Market Supervision (National Standards Committee) take the lead, and all relevant departments and units are responsible for the division of responsibilities] to develop and revise 50 national standards for aging transformation, and promote home environment, transportation, community services, and rehabilitation aids. Standards such as equipment are suitable for aging and upgrade to create a more comfortable and convenient environment for the elderly. The Ministry of Transport, the Ministry of Civil Affairs, the Ministry of Industry and Information Technology, and the General Administration of Market Supervision (National Standards Committee) take the lead, and the Ministry of Culture and Tourism, the National Health Commission, and the China Disabled Persons' Federation are responsible according to the division of responsibilities 〕

5. implementation of standard international leap project

(xxi) Expansion of international standardization partnerships. Actively practice the international standardization concept of openness, inclusiveness and cooperation, and develop a mutually beneficial and win-win standardization partnership. Continue to improve multilateral and bilateral cooperation mechanisms, strengthen standards cooperation under the framework of the World Trade Organization, continue to deepen regional standardization cooperation in Northeast Asia, Asia-Pacific, Europe, and ASEAN, and further expand standardization cooperation with Africa, Pan-America, Gulf Arab States, Oceania and other regions and countries Relations of cooperation, strengthen standardization exchanges and cooperation under the frameworks of the BRICS, APEC, SCO, and the Regional Comprehensive Economic Partnership Agreement. The General Administration of Market Supervision (National Standards Commission) takes the lead, and the Central Cyberspace Administration of China, the Ministry of Foreign Affairs, the National Development and Reform Commission, the Ministry of Education, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Civil Affairs, the Ministry of Commerce, the State Intellectual Property Office, the National International Development Cooperation Agency, the All-China Federation of Industry and Commerce, etc. are responsible according to the division of responsibilities 〕

(22) Deepening the Construction of "the belt and road initiative" Standard Unicom. Promote the construction of the "Belt and Road" standard application demonstration project, carry out personnel exchanges and training with the co-construction countries, and promote industrial and economic and trade cooperation through standardization cooperation. We will strengthen the docking of standardization strategies and mutual recognition of standards in key areas with the "Belt and Road Initiative" countries, further improve the "Belt and Road Initiative" national standard information platform, carry out standardized information exchanges, and provide standard information services for the co-construction countries. Encourage domestic enterprises and institutions to strengthen standard cooperation at the technical level with the co-construction countries in the process of international trade, overseas project construction, and technical exchanges and cooperation. The General Administration of Market Supervision (National Standards Commission) takes the lead, and the Ministry of Foreign Affairs, the National Development and Reform Commission, the Ministry of Commerce, the State-owned Assets Supervision and Administration Commission of the State Council, and the National International Development Cooperation Agency are responsible according to the division of responsibilities 〕

(23) Deep Participation in International Standards Organization Governance. Give full play to my country's role as a permanent member of the International Organization for Standardization (ISO), the International Electrotechnical Commission (IEC) and the International Telecommunication Union (ITU), and actively fulfill the international Codex Alimentarius Commission (CAC), the World Organization for Animal Health (WOAH) Member States and responsibilities, actively participate in the formulation of important policies and rules of the International Standards Organization, and do a good job in localized implementation and application, participate in the research and preparation of international standardization technology roadmaps, white papers, and standardization benefit evaluation reports in various technical fields, condense practical experience, and put forward Chinese suggestions. In accordance with the needs of the International Standards Organization to select staff to support the International Standards Organization to hold various conferences and activities in China. Support international professional standards organizations to come to China. [The General Administration of Market Supervision (National Standards Committee), the Ministry of Industry and Information Technology, and the Ministry of Agriculture and Rural Affairs take the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(24) Actively promote the development of international standards. Actively participate in the activities of international standards organizations such as ISO, IEC, ITU, the United Nations Food and Agriculture Organization (FAO), the World Forum for Harmonization of Vehicle Regulations (WP29) and other industrial international organizations, and the activities of international professional standards organizations such as the International Article Coding Organization (GS1). Encourage domestic enterprises and institutions to actively participate in the activities of international standards organizations, industry international organizations and various international professional standards organizations to contribute Chinese wisdom. We will deeply participate in the international standardization work in key areas such as carbon neutrality, digital technology and tropical agriculture, and promote the formulation of a number of international standards in the fields of greenhouse gas emission reduction, clean and low-carbon and efficient utilization of energy, new power systems, green and sustainable finance, mine safety, digitalization of shipping trade, information and communication, article coding and automatic identification. Build a number of key areas of international standardization innovation team. The General Administration of Market Supervision (National Standards Committee) and the Ministry of Industry and Information Technology take the lead, and all relevant departments and units are responsible according to the division of responsibilities 〕

(25) Improve and steadily expand the standard system-based open mechanism.. Formulate and implement guidelines for the steady expansion of standards and institutional openness, and accelerate the pace of China's standardization and opening up. Further improve the openness and transparency of my country's standardization work, ensure that foreign-invested enterprises participate in my country's standardization work on an equal basis in accordance with the law, support small, medium and micro enterprises, private enterprises and other business entities to participate in the revision of standards, and support private enterprises to take the lead in establishing international industries and standards organizations. Promote the coordinated development of domestic standards organizations and domestic counterparts of international standards organizations, and promote the consistency of the National Professional Standardization Technical Committee (hereinafter referred to as the Technical Committee) and the technical institutions of international standards organizations to reach more than 90%. Continue to carry out tracking research on international standards, accelerate the transformation of advanced and applicable international standards, and achieve a conversion rate of more than 85% of international standards. We will vigorously promote the compilation of the foreign language version of the national standard, and encourage industries and localities to formulate the foreign language version of the standard according to their needs. Support free trade pilot zones and free trade ports to put forward standard requirements based on operational practices. The General Administration of Market Supervision (National Standards Commission) takes the lead, and the Ministry of Foreign Affairs, the National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Commerce, the General Administration of Customs, the National International Development Cooperation Agency, and the All-China Federation of Industry and Commerce are responsible according to the division of responsibilities 〕

6. deepen standardization reform and innovation

(xxvi) Improving the quality of standard supply. We will improve a unified and coordinated system of mandatory national standards, strengthen the formulation of mandatory national standards for key industrial products, production safety, special equipment, social security and other fields related to the safety of people's lives and property, and further improve the coverage and authority of mandatory national standards. System optimization of recommended national standards, industry standards and local standards system. Strengthen the coordination of recommended standards and mandatory national standards. To carry out the work of recommended national standard adoption group standards. Accelerate the development of national standard samples. The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible for the division of responsibilities. In-depth implementation of the group standard training plan, cultivate a group of outstanding group standard organizations, promote the application and demonstration of group standards, and promote the high-quality development of group standards, Formulate a batch of high-level group standards that fill the gaps and lead the development. Implement the enterprise standard "leader" system, enhance the effectiveness and influence of enterprise standard "leader", and form a pattern in which enterprise standard "leader" drives the improvement of product and service quality. The General Administration of Market Supervision (National Standards Commission) and the Ministry of Civil Affairs take the lead, and the China Association for Science and Technology and the All-China Federation of Industry and Commerce are responsible according to the division of responsibilities 〕

(27) Improve the standard management level. Continuously optimize the government's standard-setting process, platform and tools, strengthen the management of the whole life cycle of standard formulation and revision, and strengthen standard maintenance, update and upgrade iteration. Further improve the efficiency of national standard formulation and revision, and shorten the average formulation cycle of new national standards to less than 18 months. Strengthen standard statistical analysis. Strengthen industry standards, local standards for the record management. Establish a national coordinated regional standardization work mechanism. Strengthen the guidance and supervision of group standards and enterprise standards. Formulate management methods for group standards, improve the evaluation mechanism of good behavior of group standards, and standardize the development of group standards. Promote the implementation of enterprise standardization promotion measures, the implementation of the standard innovative enterprise system, cultivate a number of standard innovative benchmark enterprises. Improve the standard copyright system and increase the protection of standard copyright. [The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(28) Strengthen the promotion and application of standards. Actively carry out standard publicity and implementation training, enrich publicity forms, channels and carriers, and widely disseminate standardization concepts, knowledge and methods. We should strengthen the overall coordination of standardization pilot demonstration construction, improve the management of pilot demonstration projects, improve the quality and efficiency of pilot demonstration, condense the practical experience and typical models that can be replicated and popularized, and play a leading role in radiation. The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities. Encourage standardization service agencies to enter the national service industry to expand and open up comprehensive pilot demonstration areas, national independent innovation demonstration zones, national high-tech industrial development zones, economic and technological development zones, national advanced manufacturing clusters, etc., encourage cluster promotion agencies to participate in standardization research and standard revision, and encourage standardization agencies to enter cluster promotion agencies, encourage cluster promotion agencies to participate in international standardization work, cultivate world-class advanced manufacturing clusters, etc., to form a cluster-type development effect. We will continue to promote the pilot of statistical analysis reports on standardized service industries and carry out statistical evaluation of standardized service industries. Improve the working mechanism of benchmarking and standards, and guide enterprises to aim at advanced standards to improve their level. The National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Commerce, the General Administration of Market Supervision (National Standards Commission), the National Bureau of Statistics, and the All-China Federation of Industry and Commerce shall be responsible according to the division of responsibilities 〕

(XXIX) Strengthening Supervision of Standards Implementation. Formulate and implement guidance on strengthening the implementation and supervision of standards, actively apply advanced standards in macro-control, industry promotion, industry management, market access, financial credit, government procurement and bidding, and strictly follow standards in quality supervision activities such as certification and accreditation, inspection and testing. Establish and improve the standard mechanism for the reference of regulations and policy documents, and encourage relevant units to carry out standards and legal convergence information services. Improve the standard implementation information feedback mechanism and the standard implementation data survey and statistical system, accelerate the construction of a number of standard implementation monitoring stations and mandatory standard implementation statistical analysis points, and carry out statistical analysis of the implementation of key mandatory standards on a regular basis. Establish and improve the standard implementation effect evaluation mechanism, promote the implementation effect evaluation of national standards, industry standards, local standards and group standards, and carry out the collection and promotion of standard implementation effect evaluation examples. Establish a standard-setting complaint reporting and supervision and inspection mechanism, build a national standard-setting complaint reporting platform, and accept the supervision of various standard-setting activities, technical committee work and standard review work from all walks of life. Carry out supervision and spot checks on industry standards and local standards, and strengthen the supervision of standard numbering, review and filing. Continue to promote the implementation of the enterprise standard self-declaration and supervision system, strengthen the collection and analysis of enterprise standard self-declaration public data, and promote the integration of enterprise products and services into the construction of the social credit system. [The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

7. Consolidate the Foundation of Standardization Development

(30) Deepening the research on the basic theory of standardization. We will continue to support institutions of higher learning, scientific research institutes and standardization research institutions to strengthen the theoretical exploration and practical application of standardization. We will continue to promote the opening up of the standard system, carry out in-depth research on the needs of China's standardization work under high-standard economic and trade rules such as the Comprehensive and Progressive Trans-Pacific Partnership Agreement (CPTPP) and the Digital Economic Partnership Agreement (DEPA), and strengthen the World Trade Organization Agreement on Technical Trade Measures (WTO/TBT) and the Agreement on Sanitary and Phytosanitary Measures (WTO/SPS). Conduct standardization research in key areas such as compliance management, environmental and social governance (ESG), and post-border rules. Actively promote the digitalization of standards research, build a standard system framework, and carry out standards digitalization pilot. Give full play to the role of the China Standardization Expert Committee as a think tank, and strengthen expert argumentation and decision-making consultation on important international and domestic standardization matters. The General Administration of Market Supervision (National Standards Committee), the Ministry of Science and Technology, the Ministry of Commerce, and the Chinese Academy of Engineering take the lead, and all relevant departments and units are responsible according to the division of responsibilities 〕

(31) Strengthen standard test verification. Formulate national standard verification point construction and management measures, and implement integrated management of standard verification point construction and operation and standard verification projects. Set up no less than 50 national standard verification points. Promote independent innovation and coordination of inspection and testing methods, inspection equipment, standard samples, etc. Focusing on emerging areas and advantageous areas, participating in international standard verification provides strong support for the compatibility and mutual recognition of Chinese and foreign standard systems. Promote the integrated development of quality infrastructure elements such as standards and measurement, certification and accreditation, inspection and testing. [The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(xxxii) Strengthening the support of standardized technical institutions. Promote the establishment of a number of international first-class comprehensive, professional standardization of scientific research institutions. We will further improve the professional standardization technology organization system, focus on the forward-looking layout of cutting-edge technologies and emerging fields, and accelerate the cultivation of new standardization technology organizations. In view of the standardization needs of strategic emerging industries and traditional industries for transformation and upgrading, a number of new standardization technical organizations are planned. Give full play to the role of the overall group of standardization, study the establishment of a new material standardization co-ordination mechanism, and promote the coordinated development of cross-industry and cross-field standardization. Promote the implementation of the technical organization liaison mechanism and smooth the microcirculation of the technical organization system. Deepen the promotion of assessment and evaluation, and carry out the evaluation of the ability of committee members to perform their duties on a pilot basis. Promote the classified management and dynamic management of the technical committee to achieve "can enter and exit". [The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

(33) Strengthen the construction of multi-level standardized talent team. We will strengthen standardized general higher education, promote standardized technical vocational education, and promote the integrated development of vocational education and continuing education in the field of standardization. Carry out national standardized talent classification statistics, build a national standardized talent classification training database, and build a number of national standardized talent education practice training bases. Promote the "scientific research team standard development team" integration development model, training and selection of a number of standardized leading talents. Cultivate a group of enterprise standardization directors. Encourage the technical committee to participate in the standardization curriculum system of colleges and universities, the construction of the training base of the technical committee, and coordinate the promotion of standardization professional construction and teacher training. Further enrich the standard cloud class, committee network lecture course resources, widely carry out standardized education and training. Relying on industries, localities, scientific research institutions and universities, build a number of international standardization talent training bases, and continue to carry out international standard youth talent selection and training activities. The Ministry of Education, the Ministry of Human Resources and Social Security, and the General Administration of Market Supervision (National Standards Committee) shall be responsible according to the division of responsibilities 〕

8. organization implementation

(XXXIV) Strengthening organizational leadership. Adhere to the party's overall leadership of standardization work, give full play to the role of the State Council's standardization coordination mechanism, study and formulate major standardization policies, and coordinate major standardization issues. Continuously improve the leadership mechanism for the coordinated promotion of standardization work in various regions and relevant departments, better play the role of the "baton" of government performance evaluation and performance evaluation, and coordinate the improvement of standardization work efficiency. Comprehensively carry out the evaluation of the implementation effect of the outline, and use the evaluation results as an important basis for formulating the "Fifteenth Five-Year Plan" standardization development plan. All relevant departments in all regions should effectively link up and advance the standardization work with the development plans of their respective regions and departments. The National Development and Reform Commission, the General Administration of Market Supervision (National Standards Commission), etc. shall be responsible according to the division of responsibilities 〕

(35) Strengthening policy support. Relevant departments in all regions should, in accordance with the outline and the requirements of this round of action plans, refine the division of responsibilities, pay close attention to work deployment, strengthen coordination and cooperation, and ensure that tasks are implemented in detail. Give commendations and rewards in accordance with relevant national regulations, carry out the selection of China Standard Innovation Contribution Awards, and support local and industry departments to carry out standardized commendations and rewards in accordance with regulations. Promote the construction of standardized discipline system and open up the rising channel of standardized scientific and technological workers. We will improve the standardized statistical work system, establish and improve standardized statistical work procedures, strengthen the application of statistical results, carry out an overall analysis of the development of standardization, and issue an annual report on the development of standardization. [The General Administration of Market Supervision (National Standards Committee) takes the lead, and all relevant departments and units are responsible according to the division of responsibilities] 〕

Source: National Standardization Management Committee

If there is infringement contact, delete it.